Singularity is a container platform: it lets you create and run containers that package up pieces of software in a way that is portable and reproducible. With a few basic commands, you can set up a workflow to run on Pawsey systems using Singularity. This page introduces how to get or build a Singularity container image and run that image on HPC systems.

Prerequisites

Familiarity with:

• Containers
• Modules
• Slurm Job Scheduler (external site)

Versions installed in Pawsey systems

To check the current installed versions, use the module avail command (current versions may be different from content shown here):

$ module avail singularity
------------------------------------ /software/setonix/2024.05/pawsey/modules -------------------------------------
   singularity/4.1.0-askap-gpu    singularity/4.1.0-mpi       singularity/4.1.0-slurm (D)
   singularity/4.1.0-askap        singularity/4.1.0-nohost
   singularity/4.1.0-mpi-gpu      singularity/4.1.0-nompi

Different "flavours" of singularity are identified by the suffix beyond the version number. A detailed description of the different flavours is provided in the sections below.

Getting container images and initialising Singularity

Check container availability and load the module

Singularity is installed on most Pawsey systems. Use module commands to check availability and the version installed:

$ module avail singularity

and then load the singularity module (for applications that do not need mpi, like for many of the bioinformatics containers):

$ module load singularity/4.1.0-nompi

Or, for applications that need mpi.

$ module load singularity/4.1.0-mpi

To avoid errors when downloading and running containers, run the sequence of commands in the following terminal display:

$ mkdir -p /software/projects/<project-id>/<user-name>/.singularity
$ chown -hR $USER:$PAWSEY_PROJECT /software/projects/<project-id>/<user-name>/.singularity
$ find /software/projects/<project-id>/<user-name>/.singularity -type d -exec chmod g+s {} \;

Pull or build a container image

To provide the image that you want to run, either pull an existing container image or build a container image. 

Pull containers on the compute nodes. This is particularly important for larger images because the compute nodes will perform better than the shared login nodes.

If you are developing a container, submit a Slurm interactive job allocation for a longer period of time than normally required to accommodate the download time needed for the container image. For example, to ask for 4 hours:

salloc -n 1 -t 4:00:00 -I 

Pull an existing image from a container library

You can pull existing containers from a suitable registry such as Docker Hub, Biocontainers, RedHat Quay or Sylabs Container Library. For most users, this will be the most common way you will use containers. It's a good idea to check what containers are already available before deciding to build your own container. 

To import Docker images from, for example, Docker Hub, you can use the  singularity pull  command. As Docker images are written in layers, Singularity pulls the layers instead of just downloading the image, then combines them into a Singularity SIF format container. 

$ singularity pull --dir $MYSOFTWARE/singularity/myRepository docker://user/image:tag

In this example command:

• The --dir flag specifies the image to be downloaded to a location
• docker://  indicates that you're pulling from the Docker Hub registry 
• user is the hub user 
• image is the image or repository name you're pulling
• tag is the Docker Hub tag that identifies which image to pull

Build a container image

To build a container image, we recommend using Docker, either on a local laptop or workstation or on a cloud virtual machine. For example, the Pawsey Nimbus Cloud has Ubuntu installations that come with both Singularity and Docker pre-installed. You cannot build a container image on Setonix because you will not have admin/sudo privileges. 

Docker is recommended for: 

• Compatibility, portability and shareability: Docker images can be run by any container engine, while Singularity images can only be run by Singularity.
• Ease of development: layer caching in Docker may significantly speed up the process of performing repeated image builds. In addition, Docker allows writing in containers by default, allowing for tests on the fly.
• Community adoption: community experience and know-how in writing good image recipes focuses on Docker and Dockerfiles.

Information on Dockerfile syntax can be found at Dockerfile reference (external site).

Once you've written a Dockerfile, you can use it to build a container image.

$ sudo docker build -t image:tag .

If you have Singularity installed in the same machine, you can convert the Docker image into the Singularity SIF format.

$ singularity pull image_tag.sif docker-daemon:image:tag

Then this SIF file can be transferred to Pawsey systems.

Best practices for building and maintaining images 

Building images

• Minimize image size
  • Each distinct instruction (such as RUN, CMD, etc) in the Dockerfile generates another layer in the container, increasing its size

  • To minimize image size, use multi-line commands, and clean up package manager caches.

• Avoid software bloat

  • Only install the software you need for a given application into a container.
• Make containers modular
  
  • Creating giant, monolithic containers with every possible application you could need is bad practice. It increases image size, reduces performance, and increases complexity. Containers should only contain a few applications (ideally only one) that you'll use. You can chain together workflows that use multiple containers, meaning if you need to change a particular portion you only need to update a single, small container.

There are websites which provide detailed instructions for writing good Docker recipes, such as Best practices for writing Dockerfiles (external site). We also have some base images and specific examples listed on our Pawsey GitHub containers page (external page). 

A simple snippet is provided in listing 1:

# install packages on debian/ubuntu linux os container using apt-get command
RUN apt-get update \
	&& apt-get install -y \
       autoconf \
       automake \
       gcc \
       g++ \
       python \
       python-dev \
    && apt-get clean all \
    && rm -rf /var/lib/apt/lists/*

Managing your Singularity images

Unlike Docker containers, Singularity containers can be managed as simple files. We recommend that projects keep their Singularity containers in a small number of specific directories. For example, each user might store all of their own Singularity container .sif files in a repository directory such as $MYSOFTWARE/singularity/myRepository. For containers that will be used by several users in the group, we recommend that the repository be maintained as a shared directory, such as /scratch/$PAWSEY_PROJECT/singularity/groupRepository.

When pulling Singularity images, many files and a copy of the images themselves are saved in the cache. Singularity modules at Pawsey define the cache location as $MYSCRATCH/.singularity/cache. This is to avoid problems with the restricted quota of /home, which is the default Singularity cache location.

To see all of the copies of the images that currently exist in the cache, use the singularity cache list command.

$ singularity cache list

NAME                     DATE CREATED           SIZE             TYPE
ubuntu_latest.sif        2019-10-21 13:19:50    28.11 MB         library
ubuntu_18.04.sif         2019-10-21 13:19:04    37.10 MB         library
ubuntu_18.04.sif         2019-10-21 13:19:40    25.89 MB         oci

There are 3 container file(s) using: 91.10 MB, 6 oci blob file(s) using 26.73 MB of space.
Total space used: 117.83 MB

When you have finished building or pulling your containers, clean the cache. To wipe everything use the -f flag:

$ singularity cache clean -f

Running jobs with Singularity

Job scripts require minimal modifications to run within a Singularity container. All that is needed is the singularity exec statement followed by the image name and then the name of the command to be run. Listing 2 shows an example script:

#!/bin/bash -l
#SBATCH --nodes=1
#SBATCH --ntasks=1
#SBATCH --cpus-per-task=1
#SBATCH --mem=1840M
#SBATCH --time=00:10:00
#SBATCH --partition=work

# load the singularity module which provides 
# the executable and also sets some environment variables
# (In this case, as no mpi is needed:)
module load singularity/<VERSION>-nompi

# define some useful environment variables for the container
# this would need to be updated for a users workflow
export myRepository=$MYSOFTWARE/singularity/myRepository
export containerImage=$myRepository/image.sif
# define command to be run. In this example we use ls
export mycommand=ls

# run the container with 
srun -N 1 -n 1 -c 1 singularity exec ${containerImage} ${mycommand}

Then submit the script to Slurm as follows:

Bind mounting host directories

The Singularity configuration at Pawsey takes care of always bind mounting the scratch filesystem for you. You can mount additional host directories to the container with the following syntax:

$ singularity exec -B /path/to/host/directory:/path/in/container <image name> <command>

Notes:

• singularity exec allows you to execute the container with a specific command that is placed at the end of the string.
• -B is the flag for bind mounting the directory to the container.
• You can either remove :/path/in/container  or use :/home  if you do not know the path in the container that you require to run the command from.

Sample use cases

We discuss several common use cases for containers that require some care. Each example shown below highlights the use of particular container features.

Running Python and R

For Singularity containers that have Python or R built-in, use the flag -e  (clean environment) to run the container with an isolated shell environment. This is because both Python and R make extensive use of environment variables and not using a fresh environment can pollute the container environment with pre-existing variables. If you need to read or write from a local directory, you may use the -e flag in conjunction with the -B flag.

$ singularity run -e docker://rocker/tidyverse
$ singularity run -B /path/to/host/directory:/path/in/container,/path/to/fake/home:${HOME} -e docker://rocker/tidyverse

There can be specific cases where isolating the shell environment is not feasible, for instance if you're running MPI+Python code, which needs to access scheduler environment variables. Here, a possible workaround is to unset all Python-related variables in the host shell environment and then proceed to execute the container as usual.

$ unset $( env | grep ^PYTHON | cut -d = -f 1 | xargs )
$ srun singularity run docker://python:3.8 my_script.py

Using GPUs

Singularity allows users to make use of GPUs within their containers, for both NVIDIA and AMD GPUs. Nimbus uses NVIDIA GPUs, while Setonix uses AMD GPUs. To enable NVIDIA support, add the runtime flag --nv. To use AMD GPUs, add the --rocm flag to your singularity command instead of --nv. 

Listing 3 shows an example of running Gromacs on GPUs through rocm capable container:

#!/bin/bash -l
#SBATCH --job-name=gpu
#SBATCH --gres=gpu:1
#SBATCH --nodes=1
#SBATCH --time=01:00:00

# Load Singularity
module load singularity/<VERSION>-mpi-gpu

# Define the container to use
export myRepository=$MYSOFTWARE/singularity/myRepository
export containerImage=$myRepository/gromacs_2018.2.sif

# Run Gromacs preliminary step with container
srun singularity exec --rocm $containerImage gmx grompp -f pme.mdp

# Run Gromacs MD with container
srun singularity exec --rocm $containerImage \
    					   gmx mdrun -ntmpi 1 -nb gpu -pin on -v \
                           -noconfout -nsteps 5000 -s topol.tpr -ntomp 1

The bash script can then be submitted to Slurm as follows:

$ sbatch --account=<your-pawsey-project>-gpu --partition=gpu gpu.sh

For more information on how to use GPU partitions on Setonix see: Example Slurm Batch Scripts for Setonix on GPU Compute Nodes.

Using MPI

MPI applications can be run within Singularity containers. There are two requirements to do so:

1. A host MPI installation is required to spawn MPI processes. All Pawsey systems have installed at least one MPICH Application Binary Interface (ABI) compatible implementation; non-Cray clusters also have OpenMPI.
2. In the container, an ABI-compatible MPI installation is required to compile the application. Pawsey maintains MPI base images on both DockerHub and RedHat Quay.

Below is an example of a SLURM batch script for using OpenFoam for Computational Fluid Dynamics simulations, which has been built from the MPICH pawsey/mpich-base container and adding the compilation of OpenFOAM.

Use the following script to run the simpleFoam parallel solver (it is assumed that usual preprocessing of the OpenFOAM case has been already performed):

#!/bin/bash -l

#SBATCH --account=projectID
#SBATCH --job-name=mpi-OpenFOAMcase
#SBATCH --ntasks=512
#SBATCH --ntasks-per-node=128
#SBATCH --cpus-per-task=1
#SBATCH --exclusive
#SBATCH --time=00:20:00
#SBATCH --partition=work

# ---
# load Singularity
module load singularity/<VERSION>-mpi

# ---
# Note we avoid any inadvertent OpenMP threading by setting OMP_NUM_THREADS=1
export OMP_NUM_THREADS=1

# ---
# Set MPI related environment variables for your system (see specific system guides).
export MPICH_OFI_STARTUP_CONNECT=1
export MPICH_OFI_VERBOSE=1

# ---
# Define the container to use
export theRepository=<pathToPersonalImages>
export containerImage=$theRepository/openfoam-v1912.sif

# ---
# cd into the case directory
cd $MYSCRATCH/myOpenFOAMCase

# ---
# execute the simpleFoam parallel solver with MPI
srun -N $SLURM_JOB_NUM_NODES -n $SLURM_NTASKS -c $OMP_NUM_THREADS \
     singularity exec $containerImage simpleFoam -parallel -fileHandler collated | tee log.simpleFoam

Singularity flavours on Pawsey Systems

Depending on the cluster, different Singularity modules may be available:

These modules differ on the flavour of the MPI library they bind mount in the containers at runtime, and on whether or not they also bind mount the required libraries for GPU-aware MPI:

• singularity/VV-mpi:          Cray MPI (Setonix) or Intel MPI (other clusters). All ABI compatible with MPICH
• singularity/VV-mpi-gpu: Cray MPI (Setonix) or Intel MPI (other clusters). All ABI compatible with MPICH. With GPU-aware MPI.
• singularity/VV-nompi:     For applications that do not require mpi communications (commonly Bioinformatics applications)
• singularity/VV-nohost:   For applications that require total isolation from host environment (commonly Bioinformatics applications)

Features of the modules

These singularity modules set important environment variables to provide a smoother and more efficient user experience. Modules set several key environment variables

• SINGULARITY_BINDPATH: Defines the default paths bind mounted into containers.

• SINGULARITYENV_LD_LIBRARY_PATH: Defines the default paths to search for dynamic library.

• SINGULARITYENV_LD_PRELOAD: Defines additional dynamic libraries to load when containerised applications are executed.

• SINGULARITY_CACHEDIR: Defines the location where Singularity stores intermediate blobs and full images that are download by users. The default would be to store them in the user's HOME, which would not work due to the 1 GB quota. This is updated to include /software/<project-id>/<user-name>/.singularity, to provide a viable storage location for container images (this may change in newer modules).

The module updates SINGULARITY_BINDPATH, SINGULARITYENV_LD_LIBRARY_PATH and SINGULARITYENV_LD_PRELOAD in the following ways:

• Include common critical directories such as /scratch, /astro and /askapbuffer for user data.
• Include /software for people needing to use pre-installed libraries from the software stack (typically MPI libraries).
• Include paths containing interconnect and MPI libraries (distinct paths for each cluster) to ensure near-native performance for MPI and CUDA-aware MPI applications. 

To ensure that container images are portability, Pawsey provided containers keep host libraries to a minimum. The only case currently supported by Pawsey is mounting of interconnect/MPI libraries, to maximise performance of inter-node communication for MPI and CUDA-aware MPI enabled applications.

Related pages

• Pawsey-Provided Container Images
• Singularity containers failing and reporting issues with libraries
• Quota and Writing Errors Related to the Singularity Cache Directory

External links

• Singularity User Guide
• Dockerfile reference
• For specific details about containerised OpenFOAM tools and usage, refer to the OpenFOAM documentation.