Skip to end of banner
Go to start of banner

pshell and S3 remotes

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 27 Next »

This page is specific to S3 remote types (eg acacia and AWS) it does not apply to the more specialised banksia service.

If you need more sophisticated policies and lifecycles, you can use the generated ones shown here as a starting point but will have to use awscli to add any customisations.

Setup

An acacia project can be added to your list of pshell remotes by using an arbitrary remote name (eg project123) and supplying the access/secret pair after you select the remote and login.

 Example...
pshell:/> remote add project123 s3 https://projects.pawsey.org.au
pshell:/> remote project123
 
project123:/>login
Access: xyz
Secret: ***

Policies

Simple S3 policies can also be automatically created for you, noting that:

  1. Policies are attached to buckets and are a list of statements about actions allowed or denied for that bucket only.
  2. Policies override the default project permissions so care should be taken not to lock yourself out of the bucket.
  3. Any DENY in a policy statement counts as a negative permission overall for that action, even if there is also an ALLOW elsewhere.
  4. Policies only grant visibility of objects in a bucket, not visibility of the bucket itself.

You can use the pshell command "info mybucket" to examine the active policies on that bucket.

 Examples...
Example1 - give a list of Pawsey users readonly access
project123:/>policy my-bucket +r user1,user2,user3,user4
Setting bucket=my-bucket, perm=+r, for user(s)='user1,user2,user3,user4'

Note: if a user attempts to list buckets they will see nothing. However, if they attempt to list objects inside the bucket it will show the objects inside my-bucket/ - see Note 4.


Example 2 - revoke user3 from having read access
project123:/>policy my-bucket -r user3
Setting bucket=my-bucket, perm=-r, for user(s)='user3'


Example 3 -  grant read and write permission
project123:/>policy my-bucket +rw user1
Setting bucket=my-bucket, perm=+rw, for user(s)='user1'
Example 4 - make a bucket readonly and publicly accessible
project123:/>policy my-bucket +r *
Setting bucket=my-bucket, perm=+r, for user(s)=None
Example 5 - remove all policies on a bucket
project123:/>policy my-bucket -
Deleting all policies on bucket=my-bucket

Lifecycles

Simple S3 bucket lifecycles can also be automatically created for you affecting multi-part uploads and versioning.

Use the pshell command "info mybucket" to check if there are any current lifecycle rules as the following may overwrite them.


 Examples...
Example 1 - enable multi-part and expired version cleanup after 30 days
pshell> lifecycle my-bucket +mv
Example 2 - clean up incomplete multi-part uploads after 7 days
pshell> lifecycle my-bucket +m 7


Example 3 - turn on versioning and delete expired non-current objects after 30 days
pshell> lifecycle my-bucket +v 30
Example 4 - Reviewing deleted objects

lifecycle my-bucket --review

Reviewing deletions: bucket=my-bucket, prefix=

 * folder1/my_file.txt

Example 5 - Restoring an object

lifecycle my-bucket/folder1/my_file.txt --restore

Restoring deletions: bucket=my-bucket, prefix=folder1/my_file.txt

restoring: folder1/my_file.txt

Restored object count: 1

  • No labels